How Does a Model 97 Work?

The 97 is mounted to the heating plenum of your furnace. A water line is tapped into your home's water pipes and attached to the 97 Humidifier. A Humidistat (Relative Humidity Sensor) is placed somewhere in the house to sense the dryness of the air in the home. The Humidistat will send a signal to the Humidifier to turn on when the air in the house is too dry.

The water is now turned on to the humidifier and fills a water pan that has an Evaporator Pad rotating through the water. When the water is draining through the pad the Hot Dry air from your furnace is forced through the Evaporator Pad. The air picks up moisture from the pad and delivers it into your living area.

Model 97 Specifications

Model 97 is a drum type by-pass humidifier that has the capacity for larger homes. This durable, long lasting humidifier will work with any forced air furnace and assures trouble-free performance. Model 97 also uses the by-pass method to humidify your air. The dry air is forced in from the supply and humidified, then pulled out through the return and into your living area.

Capacity-gph .80

SQ. FT. Area 3,000

Unit Size 15" W x l2 l/2" D

Plenum Opening 7 1/2" x 8 1/2"

Electrical Data 24V 60Hz, 3 watts

Also Included:

• 24V Humidistat
• Self Piercing Saddle Valve
• Transformer
• By-pass Duct